I have the same problem as this user:
http://forums.nolovr.com/discussion/437/problem-with-controllersThe controller moves from one position to another on its axis.
Usually, it is about one meter behind me, but if you press the menu button twice and look back, it is one meter ahead. When you swing the controller, you rotate the air around the axis in that position. It is great to open the test screen in NOLO ASSISTANT.
Only in steamvr there is a problem, which is also the same as the user of the link. There are several such users when searching Google, but no solution was found.
The base station repair provided by the user on the link has been tried. But it did not work.
It was working normally, but suddenly it began to break down.
I need help with the solution. ;(
Comments
Hi @Chromaitc,
Thank you for the feedback. Please do not use the base station repair software unless our support personnel asking you to try with this, as use it without instruction from our support team may cause damage to firmware and will not be covered by warranty anymore.
i) double-click menu button - it is used for 180° turn, the whole scene in the VR will be turned a 180°. Please check the settings in NOLO Assistant for hotkey setting;
ii) double-click system button - it is used for controller orientation calibration. You could find the steps in our FAQ section or setup tutorial.
-------------------
Q: How to calibrate the controller orientation?
A: Please refer to the following steps:
-------------------Step 1. Stand facing base station, the distance between base station and the player should be at least 2m (with no block in the middle);
Step 2. With headset marker and controllers facing base station,
double-click system button on each controller respectively.
Please make sure to use SteamVR stable version (not temporary/beta); and update NOLO Assistant to the latest version v1.1.14.
Would you also let us know your headset model and VR-related software (such as streaming software you are using), and follow the setup tutorial in NOLO Assistant.
If it works in NOLO Assistant, it would be software setting issues.
We suggest give TrinusPSVR a fresh reinstall (with the latest version), and according to PSVR setup tutorial at - https://www.nolovr.com/psvr. Especially the parameter settings in Step 5; and check if there is still issues.
Thank you for cooperation.
Performing a orientation calibration by pressing the system button twice will work well. But the problem is not the direction, but the location.
The Nolo Assistant is 1.1.14.
Automatically update the latest version of SteamVR.
I don't know how to check the version except for the phrase " Build 2884151 ".
The headset you use is PSVR.
The software used is ' NOLO ASSISTANT ', ' SteamVR ' and ' trinusPSVR '.
=============================================================
and
I'm still trying. After reinstalling the latest version of trinusPSvr,
the phenomenon is the same. As per the your guide, the yaw option is 0.
The fault remains the same. In steamvr, controller moves behind About one meter by me.
We'll get back to you once we have any replies from our tech team on this software issue.
Please disable 'Use Nolo Orientation' in TrinusPSVR and see if it works [updated July 14].
I'll try.
However, currently turning off the 'nolo organization' option and using it normally.
I don't know exactly what caused the problem. I've been reinstalling all of the software before, and today and today I've switched the organization option off and on and off.
Changing the bodystyle with the forward option helped.
Thank you for your support. I'm happy for you.
Let us know if there is other inquiries or issues.